LMP USB-C Multiport Adapter VGA & USB 3.0 – Silver

USB-C to VGA & USB 3.0 & USB-C charging multiport adapter

KEY FEATURES
3-Port USB-C Multiport Adapter
Plug & Play, no driver needed, bus powered
Transmits video over VGA with up to FHD 1080p resolution
Data transmission over USB 3.0 with max. 5 Gbps
Power Delivery via USB-C port to attached host computer and connected devices

TECHNICAL SPECIFICATIONS
Interfaces
1x VGA (up to FHD 1080p), 1x USB 3.0 (up to 5 Gbps),
1x USB-C for Power Delivery

System requirements
Computer with USB-C port | min. OS X 10.10 or Windows 10

Power supply
Via USB-C from host (bus powered) for low-energy peripherals or via USB-C port from external charger for simultaneous charging of the host computer and peripherals

Resolutions
2048x1152 (QWXGA) @ 50/60 Hz
1920x1200 (WUXGA) @ 50/60 Hz
1920x1080 (FHD 1080p) @ 50/60 Hz
1600x1200 (UXGA) @ 50/60 Hz
1280x1024 (SXGA) @ 50/60 Hz
1024x768 (XGA) @ 50/60 Hz
800x600 (SVGA) @ 50/60 Hz
640x480 (VGA) @ 50/60 Hz

Compatibility
MacBook 12", Chromebook Pixel, etc.

Dimensions
7.3 x 3.7 x 1.5 cm | 20 cm incl. cable | 48 gr

Package content 
LMP USB-C Multiport Adapter VGA & USB 3.0

Product Overview

USB-C (using the USB 3.1 bus) to VGA to connect external monitors, projectors, TVs, etc. VGA transmits video signal. Supports output up to1920x1080 (1080p), with exible support for USB 5G and DisplayPort 1.2 (DP Altmode). Supports VGA with bandwidth of 2.7 Gbps (HBR) and 1.62 Gbps (RBR) per lane.
 
USB port to connect external peripherals. Connects a USB cable (USB 3.0, 2.0, 1.1) to your computer with USB-C port. Delivers 3A max. power to attached devices with 5 Gbps max. transfer rate. Compatible to all Mac or PC with USB-C port. USB-C port only for PowerDelivery.

Important Notice: Unplugging the power delivery (PD) from an external power adapter via the LMP USB-C Multiport Adapter can cause the sudden interruption of the power supplied to attached devices (i.e. an external USB HDD). This in return causes attached devices to be unmounted or to loose the connection shortly (the connection is re-established automatically after 2-3 seconds) which may bring about a loss of unsaved data. Therefore, we strongly advise to save all data and/or unmount any attached device before unplugging the PD!