LMP USB-C Multiport Adapter VGA & USB 3.0 – Space Gray
USB-C to VGA & USB 3.0 & USB-C charging multiport adapter
3-Port USB-C Multiport Adapter
Plug & Play, no driver needed, bus powered
Transmits video over VGA with up to FHD 1080p resolution
Data transmission over USB 3.0 with max. 5 Gbps
Power Delivery via USB-C port to attached host computer and connected devices
1x VGA (up to FHD 1080p), 1x USB 3.0 (up to 5 Gbps),
1x USB-C for Power Delivery
Computer with USB-C port | min. OS X 10.10 or Windows 10
Via USB-C from host (bus powered) for low-energy peripherals or via USB-C port from external charger for simultaneous charging of the host computer and peripherals
2048x1152 (QWXGA) @ 50/60 Hz
1920x1200 (WUXGA) @ 50/60 Hz
1920x1080 (FHD 1080p) @ 50/60 Hz
1600x1200 (UXGA) @ 50/60 Hz
1280x1024 (SXGA) @ 50/60 Hz
1024x768 (XGA) @ 50/60 Hz
800x600 (SVGA) @ 50/60 Hz
640x480 (VGA) @ 50/60 Hz
MacBook 12", Chromebook Pixel, etc.
7.3 x 3.7 x 1.5 cm | 20 cm incl. cable | 48 gr
LMP USB-C Multiport Adapter VGA & USB 3.0
USB-C (using the USB 3.1 bus) to VGA to connect external monitors, projectors, TVs, etc. VGA transmits video signal. Supports output up to1920x1080 (1080p), with exible support for USB 5G and DisplayPort 1.2 (DP Altmode). Supports VGA with bandwidth of 2.7 Gbps (HBR) and 1.62 Gbps (RBR) per lane.
USB port to connect external peripherals. Connects a USB cable (USB 3.0, 2.0, 1.1) to your computer with USB-C port. Delivers 3A max. power to attached devices with 5 Gbps max. transfer rate. Compatible to all Mac or PC with USB-C port. USB-C port only for PowerDelivery.
Important Notice: Unplugging the power delivery (PD) from an external power adapter via the LMP USB-C Multiport Adapter can cause the sudden interruption of the power supplied to attached devices (i.e. an external USB HDD). This in return causes attached devices to be unmounted or to loose the connection shortly (the connection is re-established automatically after 2-3 seconds) which may bring about a loss of unsaved data. Therefore, we strongly advise to save all data and/or unmount any attached device before unplugging the PD!